1 Channel Digital Video Optical Transmitter & Receiver
1 Stereo Audio and 1 Data Optional

   
Typical Application
Overview

The Product provides customer with the most cost-effective solution for transmission of 1 channel uncompressed digital video, 1 reversed stereo audio and 1 reversed RS232/RS422/RS485 data over one single Fibre cable. It is an easy installation and adjustment free device while providing high quality, real-time video. The product may also be maintained by our future product, FB-V1000NMS, a Network Management System.
Applications for this product include CCTV, video surveillance, homeland security, ITS and etc.

  

Features

  • Power:
    220VAC/50Hz, standalone device
    0.2A@12VDC for rack card
  • Indicators:
    Power, Link Status, Video Signal
    Audio status, Data traffic
  • Video:
    Format: PAL/NTSC/SECAM
    Video Signal: 1Vp-p, 75ohm
    Digitization: 8bits/10bits
    Bandwidth: 8MHz
    DG <1%
    DP <1 degree
    SNR >60dB(weighted)
    Connectors: 1 BNC's
  • Physical Dimensions:
    176X220X25.4(mm) Card
    130 x 122 x 36(mm) Standalone

Specifications

  • LAN port
    Standard: Conforms to IEEE802.3 / 10Base-T Ethernet
    Data rate: 10Mbps(20Mbps/10Base-T in Full duplex topology)
    Compatible on Full/Half duplex topology
    Connectors: RJ-45 Connector
    Transfer distance: <150m
  • E1 port
    Standard: ITU G.703, G.704,
    Jitter Performance: According to ITU G.823
    Bit rate: N*64Kbps, N=1~31 (Fractional Mode) or 2.048Mbps(Full Mode)
    Line Code: HDB3
    Line Impedance: 75/120ohms optional
    Pulse Amplitude: Nominal 2.37V+-10%
  • Audio
    Channel: 1 stereo audio
    Audio Input: unbalanced, 600Ohms
    Digitization: 16bit@48k
    Frequency: 10Hz to 20KHz
    SNR: >70dB
    Connector: RJ45 or RCA
  • Data:
    Channel: 1, Reversed
    Data Rate: 0~~23.04Kbps/channel
    Selectable RS-232/RS-422/RS-485
    Connector: RJ45 or Terminal Block with Screw Clamps
  • Environment:
    Operating: -40oC~+70 oC
    Storage: -40oC~+85 oC
    Humidity: 0-95% Non-Condensing

    • Support Documents

    1-64Channel Video System User Manual
    Format: pdf
    File Size: 318 kB

  • Order Information

    Fibre Type Video Transmitter Video Receiver Range Comment
    Multimode
    (62.5/125um)    		 F7-1VT -M2S F7-1VR-M2S < 2Km video only
    F7-1VT-1AR-1DR-M3S F7-1VR-1AT-1DT- M3S
    < 2Km
    		  
    Single Mode
    (09/125um)    		 F7-1VT -S122S F7-1VR-S122S 120Km video only
    F7-1VT-1AR-1DR-S042S F7-1VR-1AT-1DT-S042S 40Km  
    F7-1VT-1AR-1DR-S082S F7-1VR-1AT-1DT-S082S 80Km  
    CWDM F7-1VT-WSllllrrS1 F7-1VR-WSllllrrS rrmKm video only
    F7-1VT-1AR-1DR-WSllllrrS F7-1VR-1AT-1DT-WllllrrS rrKm  
    Note:
  • Replace llll with CWDM wavelength, replace rr with requested distance
  • SC connectors standard, consult factory for other connectors.
  • Add -M at the end of model number for rack card product

 


For more ordering informations, please contact us.