Gigabit Fiber Transceiver
Support 1000Base-T, 1000Base-LX&1000Base-SX,
Multimode and single mode optional, double strand and single strand optional

   
Application

Overview
FB-10/100MMC Series Fiber Transceiver is designed to meet the needs for massive fiber network deployment and able to extend a legacy copper based Ethernet network via fiber cable to a maximum distance up to 120Km. It is fully compliant with IEEE802.3z standards; built-in Switch ASIC has turned the device function more like a 2 ports switch than a traditional converter. User can get all switching benefits such like traffic segmentation, frames checking & error filtering.
The installation and operation procedures of the device are simple and straightforward. Operation status can be monitored through a set of Diagnostic LED located in the front panel.

Features

  • Support 1000Base-T, 1000Base-LX&1000Base-SX
  • Convert 1000bps Ethernet copper port to optical port
  • Fiber type: Multimode and single mode optional, double strand and single strand optional
  • Up to 80Km distance on single-mode fiber
  • Allow transmitting and receiving VLAN data packet
  • Two types optional: stand-alone unit and Modular Chassis
  • Internal power supply, including AC220V or DC-48V

Specifications

  • Ethernet Copper Port
    Data rate: 10M, 100M, 1000Mbps
    Auto-negotiate on Full/Half duplex topology
    Connectors: RJ-45 Connector
    Auto MDI/MDI-X
  • Optical Port
    Support 1000Base-LX&1000Base-SX
    Connectors: SC/ST/FC single mode or Multimode
    Single Strand and Double Strand fiber port optional
    Single-mode wavelength: 1310nm and 1550nm
    Multimode wavelength: 850nm and 1310nm
    Single-mode wavelength: 1310nm and 1550nm
  • Device Size
    Standalone : 110mm*140mm*40mm
    Chassis : 19inch*250mm*125mm
  • Power
    Voltage: 100~240VAC or -48VDC
    Power Consumption: <3 Watts
  • Environment
    Temperature: 0-50oC
    Humidity: 0-90%(non-condensing)

Support Documents

Not available

Order Information
F1-M72CA Multimode, 1310nm, SC, standalone, 220VAC power supply
F1-M71CD Multimode, 850nm, SC, standalone, -48VDC power supply
F1-S4042CA Single mode, Distance: 40km, 1310nm, SC, standalone, 220VAC power supply
F1-S4042TM Single mode, Distance: 40km, 1310nm, ST, Module

For more ordering informations, please contact us.

10/100Mbps 10/100/1000Mbps Fiber Transceiver

FlexOptics Ethernet Fiber Transceiver translates transmission signals from a twisted-pair 10/100/ 1000Base-TX cable to 100/1000Base-FX fiber optic cable. It has SNMP based intelligent network management, by that user can monitor and configure the copper port and optical port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. The management system enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime.


  • * Fully compatible with IEEE802.3?IEEE802.3u?IEEE802.3z standards
  • * Up to 120km distance on single mode optical port
  • * Up to 1916 bytes package forwarded
  • * Optical port support Dual-strand, single-strand and CWDM etc
  • * Ethernet copper port supports 10/100/1000Mbps speed and half/full duplex mode Auto-negotiate
  • * Ethernet copper port supports MDI/MDI-X auto sensing
  • * Standalones and Chassis Modules Optional
  • * Support Console, WEB and SNMP management
  • * View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status
  • * Set the speed limitation from 0Mbps to 70Mbps by step of 32Kbps
  • * Support remote loop back function
  • * Support online firmware upgraded